Filing a claim is easier with good records. We document everything and talk to your adjuster for you.
Certified technicians, professional drying equipment and moisture readings you can see for yourself. No guesswork.
Water does not wait for business hours, and neither do we. Call any time and we will get a team moving.
You do not have to work out how bad it is on your own. Call, tell us what you see, and a Hamilton technician will explain the next step and what it should cost.
There are two ways an attic ends up wet. From above, rain enters through failed flashing, worn shingles, or the seals at chimneys and vents. Moisture also rises from the house below and condenses on cold roof sheathing when the attic is not ventilated well. Whichever it is, few people ever go up and look. In Hamilton, we inspect the attic, track down the source, and get it dry.
On the typical attic job, soaked insulation is the main issue. Heating and cooling bills go up because cellulose and fiberglass alike give up R-value when wet. Even worse, it keeps water pressed against the framing and the ceiling drywall for weeks. Our process is to pull the saturated insulation, dry the wood using dehumidifiers and air movers, and treat mold found on rafters or sheathing.
Attics hold junction boxes, recessed light housings and cable runs. Do not enter the attic before someone checks the power, because wet electrical parts can shock you or start a fire.
A bathroom fan that vents into the attic instead of outdoors adds warm, moist air every day. That moisture condenses on the cold sheathing and looks just like a roof leak.
Saturated insulation is heavy. Drywall that has been wet from above weakens at the fasteners and can drop suddenly, bringing wet insulation down with it.
Insulation that is damp and compressed barely insulates, and drying may not bring it back. The rooms beneath that section get colder or hotter, and you pay more for energy.
Rain that gets past the roof lands in the insulation, which absorbs it. Because the rooms below show nothing, the leak is missed and no roof repair happens.
Damp wood and paper facing in a warm, still attic are ideal for mold. Growth can begin on the sheathing and on the back of the ceiling drywall.
Repeated wetting saturates the insulation, and water gets down to the ceiling. Brown rings appear in the room below, and the drywall may start to sag.
Sheathing delaminates and loses its hold on the roofing nails. Mold spreads across large sections of the roof deck, and the rafters remain damp enough to decay.
We save what can be dried properly and remove only what cannot. Moisture readings make that call, not guesswork.
Ask a Tech: (972) 666-5860| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Insulated ductwork | Insulation under the jacket is dry and the jacket has no tears | Insulation wrap is soaked, sagging with water, or moldy |
| Roof sheathing | Only stained, still firm, and reading normal once it has dried | Soft, sagging between rafters, or its layers are separating |
| Cellulose insulation | Still loose, with dampness limited to the surface | In most cases, because it has packed down or soaked through |
| Fiberglass insulation | Quick drying of a small area that took clean rainwater | Matted, dirty, moldy, or wet for more than a few days |
| Ceiling drywall | Staining only, on drywall that is dry and flat enough to seal and paint | Weeks beneath saturated insulation, or any sagging or crumbling |
Our inspection covers the flashing points, roof deck, exhaust ducts and vents, and tells us if the water is condensation, a leak, or both. How far it spread is shown by moisture meters and thermal imaging.
We bag and remove insulation that is moldy or saturated, which lets the drywall and wood beneath it dry. The access path is kept contained and the living area underneath is protected.
With dehumidifiers and air movers, the sheathing, joists and rafters return to normal moisture levels. Visible mold is cleaned from the wood and an antimicrobial is applied.
You are shown the ventilation or roof problem to be corrected, and our findings can go to your roofer. When the attic has stayed dry, the R-value is restored with new insulation.
Not seeing your question? Call and ask. It costs nothing to talk it through.
Call (972) 666-5860Don't wait for small problems to become expensive emergencies. Call Hamilton Restoration for fast, reliable service.
Call (972) 666-5860 Now