Certified technicians, professional drying equipment and moisture readings you can see for yourself. No guesswork.
The sooner drying starts, the less there is to repair. Our phones are answered around the clock, with same-day visits when available.
We photograph the damage, log moisture readings and send the paperwork your adjuster asks for, so you have less to chase.
When you call about wall and drywall water damage, you reach a restoration team that works in Hamilton every day. We tell you what it will take, give you a clear quote and get a crew moving.
Think of drywall as a wick. When water reaches the bottom of a wall, the gypsum and paper draw it upward, often a foot or more above the level the water ever reached on the floor. Insulation and the rear of the panel can be wet through while the paint out front shows nothing unusual. That is why we check walls with a moisture meter instead of trusting how they look.
A wet wall does not automatically mean demolition. When the water was clean and the drywall remains firm, drying it where it stands is often possible, at times by pulling the baseboard and pushing air into the cavity through small holes. Walls that are mushy, falling apart, moldy or contaminated get a flood cut instead, where our crew cuts straight across above the damage and takes out whatever sits under that line.
Moisture enters where the panel meets the floor and wicks upward from there. Baseboards and the bottom plate take on moisture.
The wet line rises higher, baseboards swell and paint begins to blister. Inside the cavity, the paper face becomes a place mold can begin.
Paper peels from a core that is no longer firm. Insulation slumps inside the wall, odor builds and mold spreads across the hidden back side.
Mold and the start of decay show up on framing that has been wet the whole time. Much more wall now has to be removed and rebuilt.
Using meter readings and thermal images, our team outlines where the water went, upward and sideways, on both faces of the wall and in neighboring rooms.
Based on the water category, how long it sat and how the drywall feels, we tell you plainly which sections can be dried in place and which need to come out.
For walls being saved, baseboards come off and air is directed into the cavity. For walls being removed, we make a level flood cut and take out wet insulation.
Air movers and dehumidifiers run until studs and remaining drywall read dry, typically 3 to 5 days. After that comes insulation, new drywall hung and finished, trim put back and paint.
Water passes under the bottom plate into the next room or closet. Every wall involved is tested on its two faces, and so is the adjacent flooring.
Drywall hidden in back of cabinetry and built-in units tends to be missed and dries very slowly. Checking under the cabinet base and on the reverse face tells us if it is wet.
Mold thrives on the rear face of drywall because it is paper covered, dark and has no moving air. It can cover the hidden side while the painted face looks clean.
Outside walls have sheathing past the insulation that can also get soaked. Because it is slow to dry, we test it before any new drywall goes up.
It depends on the material, how long it stayed wet and how clean the water was. We test before we decide, and we tell you why.
Call (972) 666-5860| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Wall insulation | Rigid or spray foam of the closed cell type, which sheds water | Fiberglass and cellulose that got wet, because they slump and hold moisture |
| Baseboards and trim | Real wood pieces that stay straight and uncracked after drying | Composite baseboard that puffed up or began to crumble |
| Drywall | Clean water, caught early, still hard and flat | Soft, swollen, moldy, or wet from gray or black water |
| Paint and wallpaper | Painted surfaces with no blistering after the wall reads dry | Peeling paint and vinyl paper holding dampness against the wall |
| Outlets and switches | Devices that stayed above the wet line and test safe | Any receptacle or switch that had water in the box |
Not seeing your question? Call and ask. It costs nothing to talk it through.
Call (972) 666-5860Take action now and prevent costly damage. Hamilton Restoration is ready to help.
Call (972) 666-5860 Now